28º agosto 2020
Este material solo está disponible en los siguientes idiomas: عربي, English, 日本語, Русский, 简体中文. Por favor, ayúdanos a traducir al Español.

Fetch API

So far, we know quite a bit about fetch.

Let’s see the rest of API, to cover all its abilities.

Por favor tome nota:

Please note: most of these options are used rarely. You may skip this chapter and still use fetch well.

Still, it’s good to know what fetch can do, so if the need arises, you can return and read the details.

Here’s the full list of all possible fetch options with their default values (alternatives in comments):

let promise = fetch(url, {
  method: "GET", // POST, PUT, DELETE, etc.
  headers: {
    // the content type header value is usually auto-set
    // depending on the request body
    "Content-Type": "text/plain;charset=UTF-8"
  body: undefined // string, FormData, Blob, BufferSource, or URLSearchParams
  referrer: "about:client", // or "" to send no Referer header,
  // or an url from the current origin
  referrerPolicy: "no-referrer-when-downgrade", // no-referrer, origin, same-origin...
  mode: "cors", // same-origin, no-cors
  credentials: "same-origin", // omit, include
  cache: "default", // no-store, reload, no-cache, force-cache, or only-if-cached
  redirect: "follow", // manual, error
  integrity: "", // a hash, like "sha256-abcdef1234567890"
  keepalive: false, // true
  signal: undefined, // AbortController to abort request
  window: window // null

An impressive list, right?

We fully covered method, headers and body in the chapter Fetch.

The signal option is covered in Fetch: Abort.

Now let’s explore the rest of capabilities.

referrer, referrerPolicy

These options govern how fetch sets HTTP Referer header.

Usually that header is set automatically and contains the url of the page that made the request. In most scenarios, it’s not important at all, sometimes, for security purposes, it makes sense to remove or shorten it.

The referrer option allows to set any Referer within the current origin) or remove it.

To send no referer, set an empty string:

fetch('/page', {
  referrer: "" // no Referer header

To set another url within the current origin:

fetch('/page', {
  // assuming we're on https://javascript.info
  // we can set any Referer header, but only within the current origin
  referrer: "https://javascript.info/anotherpage"

The referrerPolicy option sets general rules for Referer.

Requests are split into 3 types:

  1. Request to the same origin.
  2. Request to another origin.
  3. Request from HTTPS to HTTP (from safe to unsafe protocol).

Unlike referrer option that allows to set the exact Referer value, referrerPolicy tells the browser general rules for each request type.

Possible values are described in the Referrer Policy specification:

  • "no-referrer-when-downgrade" – the default value: full Referer is sent always, unless we send a request from HTTPS to HTTP (to less secure protocol).
  • "no-referrer" – never send Referer.
  • "origin" – only send the origin in Referer, not the full page URL, e.g. only http://site.com instead of http://site.com/path.
  • "origin-when-cross-origin" – send full Referer to the same origin, but only the origin part for cross-origin requests (as above).
  • "same-origin" – send full Referer to the same origin, but no Referer for cross-origin requests.
  • "strict-origin" – send only origin, don’t send Referer for HTTPS→HTTP requests.
  • "strict-origin-when-cross-origin" – for same-origin send full Referer, for cross-origin send only origin, unless it’s HTTPS→HTTP request, then send nothing.
  • "unsafe-url" – always send full url in Referer, even for HTTPS→HTTP requests.

Here’s a table with all combinations:

Value To same origin To another origin HTTPS→HTTP
"no-referrer" - - -
"no-referrer-when-downgrade" or "" (default) full full -
"origin" origin origin origin
"origin-when-cross-origin" full origin origin
"same-origin" full - -
"strict-origin" origin origin -
"strict-origin-when-cross-origin" full origin -
"unsafe-url" full full full

Let’s say we have an admin zone with URL structure that shouldn’t be known from outside of the site.

If we send a fetch, then by default it always sends the Referer header with the full url of our page (except when we request from HTTPS to HTTP, then no Referer).

E.g. Referer: https://javascript.info/admin/secret/paths.

If we’d like other websites know only the origin part, not URL-path, we can set the option:

fetch('https://another.com/page', {
  // ...
  referrerPolicy: "origin-when-cross-origin" // Referer: https://javascript.info

We can put it to all fetch calls, maybe integrate into JavaScript library of our project that does all requests and uses fetch inside.

Its only difference compared to the default behavior is that for requests to another origin fetch sends only the origin part of the URL (e.g. https://javascript.info, without path). For requests to our origin we still get the full Referer (maybe useful for debugging purposes).

Referrer policy is not only for fetch

Referrer policy, described in the specification, is not just for fetch, but more global.

In particular, it’s possible to set the default policy for the whole page using Referrer-Policy HTTP header, or per-link, with <a rel="noreferrer">.


The mode option is a safe-guard that prevents occasional cross-origin requests:

  • "cors" – the default, cross-origin requests are allowed, as described in Fetch: Cross-Origin Requests,
  • "same-origin" – cross-origin requests are forbidden,
  • "no-cors" – only simple cross-origin requests are allowed.

This option may be useful when the URL for fetch comes from a 3rd-party, and we want a “power off switch” to limit cross-origin capabilities.


The credentials option specifies whether fetch should send cookies and HTTP-Authorization headers with the request.

  • "same-origin" – the default, don’t send for cross-origin requests,
  • "include" – always send, requires Accept-Control-Allow-Credentials from cross-origin server in order for JavaScript to access the response, that was covered in the chapter Fetch: Cross-Origin Requests,
  • "omit" – never send, even for same-origin requests.


By default, fetch requests make use of standard HTTP-caching. That is, it honors Expires, Cache-Control headers, sends If-Modified-Since, and so on. Just like regular HTTP-requests do.

The cache options allows to ignore HTTP-cache or fine-tune its usage:

  • "default"fetch uses standard HTTP-cache rules and headers,
  • "no-store" – totally ignore HTTP-cache, this mode becomes the default if we set a header If-Modified-Since, If-None-Match, If-Unmodified-Since, If-Match, or If-Range,
  • "reload" – don’t take the result from HTTP-cache (if any), but populate cache with the response (if response headers allow),
  • "no-cache" – create a conditional request if there is a cached response, and a normal request otherwise. Populate HTTP-cache with the response,
  • "force-cache" – use a response from HTTP-cache, even if it’s stale. If there’s no response in HTTP-cache, make a regular HTTP-request, behave normally,
  • "only-if-cached" – use a response from HTTP-cache, even if it’s stale. If there’s no response in HTTP-cache, then error. Only works when mode is "same-origin".


Normally, fetch transparently follows HTTP-redirects, like 301, 302 etc.

The redirect option allows to change that:

  • "follow" – the default, follow HTTP-redirects,
  • "error" – error in case of HTTP-redirect,
  • "manual" – don’t follow HTTP-redirect, but response.url will be the new URL, and response.redirected will be true, so that we can perform the redirect manually to the new URL (if needed).


The integrity option allows to check if the response matches the known-ahead checksum.

As described in the specification, supported hash-functions are SHA-256, SHA-384, and SHA-512, there might be others depending on a browser.

For example, we’re downloading a file, and we know that it’s SHA-256 checksum is “abcdef” (a real checksum is longer, of course).

We can put it in the integrity option, like this:

fetch('http://site.com/file', {
  integrity: 'sha256-abcdef'

Then fetch will calculate SHA-256 on its own and compare it with our string. In case of a mismatch, an error is triggered.


The keepalive option indicates that the request may “outlive” the webpage that initiated it.

For example, we gather statistics about how the current visitor uses our page (mouse clicks, page fragments he views), to analyze and improve user experience.

When the visitor leaves our page – we’d like to save the data at our server.

We can use window.onunload event for that:

window.onunload = function() {
  fetch('/analytics', {
    method: 'POST',
    body: "statistics",
    keepalive: true

Normally, when a document is unloaded, all associated network requests are aborted. But keepalive option tells the browser to perform the request in background, even after it leaves the page. So this option is essential for our request to succeed.

It has a few limitations:

  • We can’t send megabytes: the body limit for keepalive requests is 64kb.
    • If we need to gather a lot of statistics about the visit, we should send it out regularly in packets, so that there won’t be a lot left for the last onunload request.
    • This limit applies to all keepalive requests together. In other words, we can perform multiple keepalive requests in parallel, but the sum of their body lengths should not exceed 64kb.
  • We can’t handle the server response if the document is unloaded. So in our example fetch will succeed due to keepalive, but subsequent functions won’t work.
    • In most cases, such as sending out statistics, it’s not a problem, as server just accepts the data and usually sends an empty response to such requests.
Mapa del Tutorial


lea esto antes de comentar…
  • Si tiene sugerencias sobre qué mejorar, por favor enviar una propuesta de GitHub o una solicitud de extracción en lugar de comentar.
  • Si no puede entender algo en el artículo, por favor explique.
  • Para insertar algunas palabras de código, use la etiqueta <code>, para varias líneas – envolverlas en la etiqueta <pre>, para más de 10 líneas – utilice una entorno controlado (sandbox) (plnkr, jsbin, codepen…)